Utiliti Controls

N-9, 11 mm bimetal disc thermostat is designed to minimize its size, without compromising its performance. These thermostats are individually calibrated and tested to meet both thermal and electrical characteristics. The contacts are made of silver alloy for long life. The snap action of the bimetal disc provides high speed contact separation resulting in excellent life cycle characteristics at electrical loads, up to 8 Amps at 250VAC (100,000 cycles).

A variety of terminal and mounting configurations are available for maximum design flexibility. The quality, reliability, affordability and versatility of the N-9 series make it the thermostat of choice for a wide variety of temperature control applications.

N-8, 1/2" bimetal disc thermostat is designed as per internationally accepted dimensions. These thermostats are individually calibrated and tested to meet both thermal and electrical characteristics. Resistance to vibration and harsh environments are additional features. The contacts are made of silver alloy for long life. The snap action of the bimetal disc provides high speed contact separation resulting in excellent life cycle characteristics at electrical loads, up to 15 Amps at 120VAC or 8 Amps at 250VAC (100,000 cycles), 16 Amps at 250VAC (30,000 cycles) and 24 Amps at 250VAC (10 000 cycle).

A variety of terminal and mounting configurations are available for maximum design flexibility. The quality, reliability, affordability and versatility of the N-8 series make it the thermostat of choice for a wide variety of temperature control applications.

N-8, 1/2" bimetal disc thermostat is designed as per internationally accepted dimensions. These thermostats are individually calibrated and tested to meet both thermal and electrical characteristics. Resistance to vibration and harsh environments are additional features. The contacts are made of silver alloy for long life. The snap action of the bimetal disc provides high speed contact separation resulting in excellent life cycle characteristics at electrical loads, up to 15 Amps at 120VAC or 8 Amps at 250VAC (100,000 cycles), 16 Amps at 250VAC (30,000 cycles) and 24 Amps at 250VAC (10 000 cycle).

A variety of terminal and mounting configurations are available for maximum design flexibility. The quality, reliability, affordability and versatility of the N-8 series make it the thermostat of choice for a wide variety of temperature control applications.

N-8, 1/2" bimetal disc thermostat is designed as per internationally accepted dimensions. These thermostats are individually calibrated and tested to meet both thermal and electrical characteristics. Resistance to vibration and harsh environments are additional features. The contacts are made of silver alloy for long life. The snap action of the bimetal disc provides high speed contact separation resulting in excellent life cycle characteristics at electrical loads, up to 15 Amps at 120VAC or 8 Amps at 250VAC (100,000 cycles), 16 Amps at 250VAC (30,000 cycles) and 24 Amps at 250VAC (10 000 cycle).

A variety of terminal and mounting configurations are available for maximum design flexibility. The quality, reliability, affordability and versatility of the N-8 series make it the thermostat of choice for a wide variety of temperature control applications.

N-8, 1/2" bimetal disc thermostat is designed as per internationally accepted dimensions. These thermostats are individually calibrated and tested to meet both thermal and electrical characteristics. Resistance to vibration and harsh environments are additional features. The contacts are made of silver alloy for long life. The snap action of the bimetal disc provides high speed contact separation resulting in excellent life cycle characteristics at electrical loads, up to 15 Amps at 120VAC or 8 Amps at 250VAC (100,000 cycles), 16 Amps at 250VAC (30,000 cycles) and 24 Amps at 250VAC (10 000 cycle).

A variety of terminal and mounting configurations are available for maximum design flexibility. The quality, reliability, affordability and versatility of the N-8 series make it the thermostat of choice for a wide variety of temperature control applications.

tiliti Controls was established in 1990. We are a privately held company led by its founder Mr. Sagar Tamhankar, an Electrical Engineer. Our Thermal Control products are divided in two major categories; Snap Disc Thermostats and Thermal Overload Protectors. Since then, we have added many additional Models that are used in applications ranging from power supply, power generation, refrigeration, personal care products, battery packs, household appliances, heating appliances and numerous others. We supply our products to many reputed OEMs in India & export them worldwide. At Utiliti Controls, we know what our customers want and we respond by providing innovative solutions. Our products are committed to high quality, cost effective that meets customer requirements.

N-2 delivers the maximum protection in the smallest package at an excellent price. At the heart of the protector is a bimetal Snap–action disc. When the temperature of this disc reaches its pre-calibrated temperature it snaps open, resulting in an open circuit. This temperature is reached during a fault condition. After the circuit breaks, the system cools and the N-2 automatically resets, allowing power to be restored to the circuit.

N-2 provides complete protection in:
Overload Condition: Gradual increase in winding temperature due to overload is sensed by the N-2 TOP causing it to switch open and protect the Device from overloading.


Lock Rotor Condition: High current due to Locked Rotor Condition generates high internal heat in the TOP causing it to switch open within 3 to 10 seconds.

Short Circuit Condition: Very high short circuit current generates instantaneous internal heat inside the TOP causing it to switch open in a fraction of second and protect the device.

N-2 Thermal Overload Protector is excellent for use in motor, transformer and lighting applications. It is available in 2, 4, 8, 12 Amps ratings for 120, 240VAC (10,000 cycles).

N-8, 1/2" bimetal disc thermostat is designed as per internationally accepted dimensions. These thermostats are individually calibrated and tested to meet both thermal and electrical characteristics. Resistance to vibration and harsh environments are additional features. The contacts are made of silver alloy for long life. The snap action of the bimetal disc provides high speed contact separation resulting in excellent life cycle characteristics at electrical loads, up to 15 Amps at 120VAC or 8 Amps at 250VAC (100,000 cycles), 16 Amps at 250VAC (30,000 cycles) and 24 Amps at 250VAC (10 000 cycle).

A variety of terminal and mounting configurations are available for maximum design flexibility. The quality, reliability, affordability and versatility of the N-8 series make it the thermostat of choice for a wide variety of temperature control applications.

N-8, 1/2" bimetal disc thermostat is designed as per internationally accepted dimensions. These thermostats are individually calibrated and tested to meet both thermal and electrical characteristics. Resistance to vibration and harsh environments are additional features. The contacts are made of silver alloy for long life. The snap action of the bimetal disc provides high speed contact separation resulting in excellent life cycle characteristics at electrical loads, up to 15 Amps at 120VAC or 8 Amps at 250VAC (100,000 cycles), 16 Amps at 250VAC (30,000 cycles) and 24 Amps at 250VAC (10 000 cycle).

A variety of terminal and mounting configurations are available for maximum design flexibility. The quality, reliability, affordability and versatility of the N-8 series make it the thermostat of choice for a wide variety of temperature control applications.

N-8, 1/2" bimetal disc thermostat is designed as per internationally accepted dimensions. These thermostats are individually calibrated and tested to meet both thermal and electrical characteristics. Resistance to vibration and harsh environments are additional features. The contacts are made of silver alloy for long life. The snap action of the bimetal disc provides high speed contact separation resulting in excellent life cycle characteristics at electrical loads, up to 15 Amps at 120VAC or 8 Amps at 250VAC (100,000 cycles), 16 Amps at 250VAC (30,000 cycles) and 24 Amps at 250VAC (10 000 cycle).

A variety of terminal and mounting configurations are available for maximum design flexibility. The quality, reliability, affordability and versatility of the N-8 series make it the thermostat of choice for a wide variety of temperature control applications.

N-9, 11 mm bimetal disc thermostat is designed to minimize its size, without compromising its performance. These thermostats are individually calibrated and tested to meet both thermal and electrical characteristics. The contacts are made of silver alloy for long life. The snap action of the bimetal disc provides high speed contact separation resulting in excellent life cycle characteristics at electrical loads, up to 8 Amps at 250VAC (100,000 cycles).

A variety of terminal and mounting configurations are available for maximum design flexibility. The quality, reliability, affordability and versatility of the N-9 series make it the thermostat of choice for a wide variety of temperature control applications.

N-9, 11 mm bimetal disc thermostat is designed to minimize its size, without compromising its performance. These thermostats are individually calibrated and tested to meet both thermal and electrical characteristics. The contacts are made of silver alloy for long life. The snap action of the bimetal disc provides high speed contact separation resulting in excellent life cycle characteristics at electrical loads, up to 8 Amps at 250VAC (100,000 cycles).

A variety of terminal and mounting configurations are available for maximum design flexibility. The quality, reliability, affordability and versatility of the N-9 series make it the thermostat of choice for a wide variety of temperature control applications.